Phone:
+86-25-637-1192
+86-25-637-1193
English
| Quantity: | |
|---|---|
TCA-L44
TCA-L44
107541-22-0
1.Product Introduction of the Titanate Coupling Agent TCA-L44 (CAS No. 107541-22-0)
Titanate Coupling Agent TCA-L44 (CAS No. 107541-22-0), Our model TCA-L44(equivalent to Ken-React® LICA 44 ), is a methane, oxygen alkanolamine titanate, its function is same to Ken-React® LICA 44 from Kenrich Petrochemicals, Inc.
Compared to its monoalkoxy titanate counterpart, TCA-K44, as a neoalkoxy titanate TCA-L44 has a better effect of catalyst, coupling and dispersion.
2. Product Parameter (Specification) of the Titanate Coupling Agent TCA-L44 (CAS No. 107541-22-0)
Index | Value |
Appearance | Brownish Orange liquid |
Specific Gravity @ 20℃ | 1.17 |
Viscosity @ (25 ℃), CPS | 7500 |
Solids in IPA Solvent % | ≥ 99 |
Flash Point (TCC) | 93 ℃ (200 ℉) |
Initial Boiling Point | 121 ℃ (250 ℉) |
pH (Saturated Solution) | 11 |
Solubility | Soluble in Isopropanol. Limited solubility (<5%) inxylene and toluene. Insoluble in Mineral Oil and H2O. Reacts with DOP. May be made water soluble via emulsification using surfactants such as sodium dodecylbenzene-sulfonate (anionic), ethoxylated nonyl phenol (non-anionic) or cetyl trimethyl ammonium chloride (cationic). |
3.Application of the Titanate Coupling Agent TCA-L44 (CAS No. 107541-22-0):
1. This product is a kind of alkanol amine titanate. It is the necessary hardener in the water dispersible polyester enameled wire paint.
2. TCA-L44 is the room temperature water-soluble amine resin catalyst, instead of the previous metal soap catalyst, significantly improved the film's mechanical properties, weather resistance, salt spray and anti yellowing.
3. It is an effective UV absorber that can also be used to formulate skin care cream.
4. TCA-L44 is used in water-based coating system, with good dispersion and effect of anti-Shen. For water-based coatings of interior walls which have precipitation, after adding 1% of the product and mixing can be recovered. In 2-3 months, no longer produce hard precipitation.
5. After surface treatment with the product to the steel, coating’s adhesion and durability can be improved significantly.
6. For epoxy resin, TCA-L44 is very useful for filler, pigment dispersion and to improve the mechanical strength and chemical resistance of the final product. For example it can improve the strength of Kevlar reinforced epoxy composites.
4. Packing Details of the Titanate Coupling Agent TCA-L44 (CAS No. 107541-22-0)
The regular packing of Titanate Coupling Agent TCA-L44 (CAS No. 107541-22-0)
is 25kg pail, 200L drums and 1000L immediate bulk container.
 |  |  |
5.Storage and Shelf Life of Titanate Coupling Agent TCA-L44 (CAS No. 107541-22-0):
Should be stored in dry, cool, ventilated room; keep away from water, moisture, high temperature and fire. This product has a shelf life of at least 12 months if stored in tightly closed original container at room temperature.
If this product is kept beyond the shelf life recommend on the product label, it is not necessarily unusable, but a quality control should be performed on the properties relevant to the application.
1.Product Introduction of the Titanate Coupling Agent TCA-L44 (CAS No. 107541-22-0)
Titanate Coupling Agent TCA-L44 (CAS No. 107541-22-0), Our model TCA-L44(equivalent to Ken-React® LICA 44 ), is a methane, oxygen alkanolamine titanate, its function is same to Ken-React® LICA 44 from Kenrich Petrochemicals, Inc.
Compared to its monoalkoxy titanate counterpart, TCA-K44, as a neoalkoxy titanate TCA-L44 has a better effect of catalyst, coupling and dispersion.
2. Product Parameter (Specification) of the Titanate Coupling Agent TCA-L44 (CAS No. 107541-22-0)
Index | Value |
Appearance | Brownish Orange liquid |
Specific Gravity @ 20℃ | 1.17 |
Viscosity @ (25 ℃), CPS | 7500 |
Solids in IPA Solvent % | ≥ 99 |
Flash Point (TCC) | 93 ℃ (200 ℉) |
Initial Boiling Point | 121 ℃ (250 ℉) |
pH (Saturated Solution) | 11 |
Solubility | Soluble in Isopropanol. Limited solubility (<5%) inxylene and toluene. Insoluble in Mineral Oil and H2O. Reacts with DOP. May be made water soluble via emulsification using surfactants such as sodium dodecylbenzene-sulfonate (anionic), ethoxylated nonyl phenol (non-anionic) or cetyl trimethyl ammonium chloride (cationic). |
3.Application of the Titanate Coupling Agent TCA-L44 (CAS No. 107541-22-0):
1. This product is a kind of alkanol amine titanate. It is the necessary hardener in the water dispersible polyester enameled wire paint.
2. TCA-L44 is the room temperature water-soluble amine resin catalyst, instead of the previous metal soap catalyst, significantly improved the film's mechanical properties, weather resistance, salt spray and anti yellowing.
3. It is an effective UV absorber that can also be used to formulate skin care cream.
4. TCA-L44 is used in water-based coating system, with good dispersion and effect of anti-Shen. For water-based coatings of interior walls which have precipitation, after adding 1% of the product and mixing can be recovered. In 2-3 months, no longer produce hard precipitation.
5. After surface treatment with the product to the steel, coating’s adhesion and durability can be improved significantly.
6. For epoxy resin, TCA-L44 is very useful for filler, pigment dispersion and to improve the mechanical strength and chemical resistance of the final product. For example it can improve the strength of Kevlar reinforced epoxy composites.
4. Packing Details of the Titanate Coupling Agent TCA-L44 (CAS No. 107541-22-0)
The regular packing of Titanate Coupling Agent TCA-L44 (CAS No. 107541-22-0)
is 25kg pail, 200L drums and 1000L immediate bulk container.
| | |
5.Storage and Shelf Life of Titanate Coupling Agent TCA-L44 (CAS No. 107541-22-0):
Should be stored in dry, cool, ventilated room; keep away from water, moisture, high temperature and fire. This product has a shelf life of at least 12 months if stored in tightly closed original container at room temperature.
If this product is kept beyond the shelf life recommend on the product label, it is not necessarily unusable, but a quality control should be performed on the properties relevant to the application.
